is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Remove Grout with a Hammer and Chisel
1 Hammer
2 Chisel
3 Safety goggles
4 Dust mask
5 Work gloves
6 Knee pads
7 Grout saw
8 Tile nipper
9 Pry bar
10 Bucket and sponge

How to Remove Grout with a Hammer and Chisel

DIY Guide: Removing Grout Made Easy with Hammer and Chisel

Removing grout with a hammer and chisel can be a time-consuming and physically demanding task, but it is a necessary step if you want to replace or repair tiles in your home. Here is a step-by-step guide to help you remove grout with a hammer and chisel:

Step 1: Prepare the work area
Before you start removing grout, make sure to prepare the work area. Cover the surrounding tiles with a protective material to prevent damage from flying debris. You may also want to wear safety goggles and a dust mask to protect your eyes and lungs.

Step 2: Choose the right chisel
Select a chisel that is appropriate for the width of the grout line you are removing. A narrow chisel is best for thin grout lines, while a wider chisel is better for thicker grout lines.

Step 3: Make a starting point
Use the chisel to create a starting point by making a small hole in the grout. This can be done by tapping the chisel lightly with a hammer.

Step 4: Remove the grout
Once you have created a starting point, use the chisel to carefully remove the grout from between the tiles. Work in small sections, using the chisel to chip away at the grout and create a gap between the tiles.

Step 5: Repeat the process
Continue to work your way down the grout line, chipping away at the grout and creating gaps between the tiles. Be patient and take your time, as removing grout can be a slow process.

Step 6: Clean up
Once you have removed all of the grout, use a vacuum or brush to clean up any debris. You may also want to wipe down the tiles with a damp cloth to remove any remaining grout dust.

Removing grout with a hammer and chisel can be a challenging task, but with the right tools and techniques, it can be done effectively. Just remember to take your time, work in small sections, and be patient. Good luck!